Comparative tables for industrial garage doors

Number and distribution of sections according to door height (89 Kb)

The cost of being stronger for longer

By choosing a sectional overhead door and its components adapted to your application, and by following a regular maintenance program, you can cut your annual maintenance and repair bills down to size. A relatively minimal price differential can result in a significantly higher degree of durability. Will you see a rapid return on your additional investment?

Compare!

Relative costs of door panels

Door Model Price difference compared to the G‑5000

G‑1000

(Aluminum, 0.023 in or 0,60 mm, door : 1 ¾")

115

G‑2323

(23/23 ga. galvanized steel, door : 1 ¾")

144

G‑2023

(20/23 ga. galvanized steel, door : 1 ¾")

159

G‑2020

(20/20 ga. galvanized steel, door : 1 ¾")

173

G‑5200

(26/26 ga. galvanized steel, door : 2")

109

G‑5000

(26/26 ga. galvanized steel, door : 1 ¾")

100

G‑5138

(26/26 ga. galvanized steel, door : 1 3/8")

94

TG‑6200

(26/26 ga. galvanized steel, door : 2")

89

TG‑8524

(24 ga. galvanized steel, door: 2")

53

TG‑8524

(24 ga. galvanized steel, door: 2")

75

G‑4400

(Service‑station door type, door : 1 ¾")

See Note 1

Note:

  • Because this door is fully glazed, it is difficult to compare with others.
  • For a door of the same size and with the same hardware system. Installation included. Manual operation. Price comparison may vary depending on the cost of the electric door opener and accessories.
Features G‑1000 G‑2323 G‑2023 & G‑2020
Metal and finish Aluminum, wood grain Galvanized steel, light textured Galvanized steel, light textured
Door thickness 1 ¾" (45 mm) 1 ¾" (45 mm) 1 ¾" (45 mm)
Metal thickness 0.023 in (0.60 mm) 0.023 in (0.60 mm)
  • G‑2023: 0.033 in (0.84 mm) outside and 0.023 in (0.60 mm) inside
  • G‑3005: 0.033 in (0.84 mm) both sides
Coating Baked‑on polyester paint Baked‑on polyester paint Baked‑on polyester paint
Choice of colors 8 colors Tex White Tex White
Available designs

4 grooves

Raised panels

4 grooves

Raised panels

4 grooves

Raised panels

Choice of sizes
  • Height: increments of 1" (25 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 4' to 29' 6" (1.2 to 9 m)
  • Height: increments of 1" (25 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 5' to 24' 2" (1.5 to 7.4 m)
  • Height: increments of 1" (25 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 5' to 24' 2" (1.5 to 7.4 m)
Insulation High‑pressure injected polyurethane core High‑pressure injected polyurethane core High‑pressure injected polyurethane core
R‑value R‑16 R‑16 R‑16
"k" Factor k=0.357 W/m2K k=0.357 W/m2K k=0.357 W/m2K
G‑1000
Metal and finish
Aluminum, wood grain
Door thickness
1 ¾" (45 mm)
Metal thickness
0.023 in (0.60 mm)
Coating
Baked‑on polyester paint
Choice of colors
8 colors
Available designs

4 grooves

Raised panels

Choice of sizes
  • Height: increments of 1" (25 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 4' to 29' 6" (1.2 to 9 m)
Insulation
High‑pressure injected polyurethane core
R‑value
R‑16
"k" Factor
k=0.357 W/m2K
G‑2323
Metal and finish
Galvanized steel, light textured
Door thickness
1 ¾" (45 mm)
Metal thickness
0.023 in (0.60 mm)
Coating
Baked‑on polyester paint
Choice of colors
Tex White
Available designs

4 grooves

Raised panels

Choice of sizes
  • Height: increments of 1" (25 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 5' to 24' 2" (1.5 to 7.4 m)
Insulation
High‑pressure injected polyurethane core
R‑value
R=16
"k" Factor
k=0.357 W/m2K
G‑2023 & G‑2020
Metal and finish
Galvanized steel, light textured
Door thickness
1 ¾" (45 mm)
Metal thickness
  • G‑2023: 0.033 in (0.84 mm) outside and 0.023 in (0.60 mm) inside
  • G‑3005: 0.033 in (0.84 mm) both sides
Coating
Baked‑on polyester paint
Choice of colors
Tex White
Available designs

4 grooves

Raised panels

Choice of sizes
  • Height: increments of 1" (25 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 5' to 24' 2" (1.5 to 7.4 m)
Insulation
High‑pressure injected polyurethane core
R‑value
R‑16
"k" Factor
k=0.357 W/m2K
Features G‑4400 (Service-station) G‑5000 G‑5138
Metal and finish Aluminum extrusions Steel, woodgrain Steel, woodgrain
Door thickness 1 ¾" (44.5 mm) 1 ¾" (44.5 mm) 1 3⁄8" (35 mm)
Metal thickness 0.125 in (3.2 mm ) at hinge fastening point 0.016 in (0.40 mm) 0.016 in (0.40 mm)
Coating Frames made of aluminum extrusions Baked‑on polyester paint Baked‑on polyester paint
Choice of colors Clear Anodized or Prepainted White or Black Ice White, Desert Sand, Claystone, Moka Brown, Dark Sand, Evergreen, Black, Silver, Charcoal White, Desert Sand, Claystone, Dark Sand, Moka Brown
Available designs Glazing (various pane styles)

Grooved

Raised panels

Grooved

Raised panels

Choice of sizes
  • Height: increments of 1" (25 mm), from 6' to 18' (1.8 to 5.5 m)
  • Width: increments of 1" (25 mm ), from 4' to 24' (1.2 to 7.3 m)
  • Height: increments of 3" (75 mm), from 6' to 24' (1830 to 7315 mm)
  • Width: increments of 1" (25 mm), from 4' to 29' 6" (1.2 to 9 m)
  • Height: increments of 3" (75 mm), from 6' to 18' (1.8 to 5.5 m)
  • Width: increments of 1" (25 mm ), from 4' to 18' 2" (1.2 to 5.5 m)
Insulation Non‑insulated High‑pressure injected polyurethane core High‑pressure injected polyurethane core
R‑value None R‑16 R‑12
"k" Factor None k=0.357 W/m2K k=0.476 W/m2K
G‑4400 (Service-station)
Metal and finish
Aluminum extrusions
Door thickness
1 ¾" (44.5 mm)
Metal thickness
0.125 in (3.2 mm ) at hinge fastening point
Coating
Frames made of aluminum extrusions
Choice of colors
Clear Anodized or Prepainted White or Black
Available designs
Glazing (various pane styles)
Choice of sizes
  • Height: increments of 1" (25 mm), from 6' to 18' (1.8 to 5.5 m)
  • Width: increments of 1" (25 mm), from 4' to 24' (1.2 to 7.3 m)
Insulation
Non‑insulated
R‑value
None
"k" Factor
None
G‑5000
Metal and finish
Steel, woodgrain
Door thickness
1 ¾" (44.5 mm)
Metal thickness
0.016 in (0.40 mm)
Coating
Baked‑on polyester paint
Choice of colors
Ice White, Desert Sand, Claystone, Moka Brown, Dark Sand, Evergreen, Black, Silver, Charcoal
Available designs
Grooved, Raised panels
Choice of sizes
  • Height: increments of 3" (75 mm), from 6' to 24' (1830 to 7315 mm)
  • Width: increments of 1" (25 mm), from 4' to 29' 6" (1.2 to 9 m)
Insulation
High‑pressure injected polyurethane core
R‑value
R‑16
"k" Factor
k=0.357 W/m2K
G‑5138
Metal and finish
Steel, woodgrain
Door thickness
1 3⁄8" (35 mm)
Metal thickness
0.016 in (0.40 mm)
Coating
Baked‑on polyester paint
Choice of colors
Ice White, Desert Sand, Claystone, Dark Sand, Moka Brown
Available designs
Grooved, Raised panels
Choice of sizes
  • Height: increments of 3" (75 mm), from 6' to 18' (1.8 to 5.5 m)
  • Width: increments of 1" (25 mm), from 4' to 18' 2" (1.2 to 5.5 m)
Insulation
High‑pressure injected polyurethane core
R‑value
R‑12
"k" Factor
k=0.476 W/m2K
Features G‑5200 TG‑6200
Metal and finish Steel, woodgrain Steel, woodgrain
Door thickness 2" (50 mm) 2" (50 mm)
Metal thickness 0.016 in (0.40 mm) 0.016 in (0.40 mm)
Coating Baked‑on polyester paint Baked‑on polyester paint
Choice of colors Ice White Ice White, Desert Sand, Claystone, Dark Sand, Moka Brown, Evergreen
Available designs Grooved Flush(no grooves)
Choice of sizes
  • Height: increments of 3" (75 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 4' to 29' 6" (1.2 to 9 m)
  • Height: increments of 3" (75 mm), from 6' to 18' (1.8 to 5.5 m)
  • Width: increments of 1" (25 mm), from 5' to 18' 2" (1.5 to 5.5 m)
Insulation High‑pressure injected polyurethane core Polystyrene core
R‑value R-18 R-10
"k" Factor k=0.313 W/m2K k=0.556 W/m2K
G‑5200
Metal and finish
Steel, woodgrain
Door thickness
2" (50 mm)
Metal thickness
0.016 in (0.40 mm)
Coating
Baked‑on polyester paint
Choice of colors
Ice White
Available designs
Grooved
Choice of sizes
  • Height: increments of 3" (75 mm), from 6' to 24' (1.8 to 7.3 m)
  • Width: increments of 1" (25 mm), from 4' to 29' 6" (1.2 to 9 m)
Insulation
High‑pressure injected polyurethane core
R‑value
R‑18
"k" Factor
k=0.313 W/m2K
G‑8524
Metal and finish
Steel, woodgrain
Door thickness
2" (50 mm)
Metal thickness
0.016 in (0.40 mm)
Coating
Baked‑on polyester paint
Choice of colors
Ice White, Desert Sand, Claystone, Dark Sand, Moka Brown, Evergreen
Available designs
Flush (no grooves)
Choice of sizes
  • Height: increments of 3" (75 mm), from 6' to 18' (1.8 to 5.5 m)
  • Width: increments of 1" (25 mm), from 5' to 18' 2" (1.5 to 5.5 m)
Insulation
Polystyrene core
R‑value
R‑10
"k" Factor
k=0.556 W/m2K
Features TG‑8024 TG‑8524
Metal and finish Steel, woodgrain Steel, woodgrain
Door thickness 2" (50 mm) 2" (50 mm)
Metal thickness 24 gauge 24 gauge
Coating Baked‑on polyester paint Baked‑on polyester paint
Choice of colors Ice White Ice White
Available designs Grooved Grooved
Choice of sizes
  • Height: increments of 3" (76 mm), from 8' to 18' (2.4 to 5.5 m)
  • Width: increments of 1" (25 mm), from 5' to 24' (1.5 to 7.3 m)
  • Height: increments of 3" (76 mm), from 8' to 18' (2.4 to 5.5 m)
  • Width: increments of 1" (25 mm), from 5' to 24' (1.5 to 7.3 m)
Insulation Non‑insulated Polystyrene with PVC backing protection
R‑value None R‑6.6
"k" Factor None k=0.860 W/m2K
TG‑8024
Metal and finish
Steel, woodgrain
Door thickness
2" (50 mm)
Metal thickness
24 gauge
Coating
Baked‑on polyester paint
Choice of colors
Ice White, Desert Sand, Claystone, Dark Sand, Moka Brown, Evergreen
Available designs
Grooved
Choice of sizes
  • Height: increments of 3" (76 mm), from 8' to 18' (2.4 to 5.5 m)
  • Width: increments of 1" (25 mm), from 5' to 24' (1.5 to 7.3 m)
Insulation
Non‑insulated
R‑value
None
"k" Factor
None
TG‑8524
Metal and finish
Steel, woodgrain
Door thickness
2" (50 mm)
Metal thickness
24 gauge
Coating
Baked‑on polyester paint
Choice of colors
Ice White, Desert Sand, Claystone, Dark Sand, Moka Brown, Evergreen
Available designs
Grooved
Choice of sizes
  • Height: increments of 3" (76 mm), from 8' to 18' (2.4 to 5.5 m)
  • Width: increments of 1" (25 mm), from 5' to 24' (1.5 to 7.3 m)
Insulation
Polystyrene with PVC backing protection
R‑value
R‑6.6
"k" Factor
k=0.860 W/m2K

Back to Architects & designers corner

Copyright Garaga Inc. | Privacy Policy and Conditions of Use | Site Map