G‑1000

G-1000 doors, 16' x 14', White, Standard windowsG-1000 doors, 16' x 14', White, Standard windows

  • Aluminum
  • Thickness: 1 ¾"
  • 4 colours
  • Polyurethane sandwich door
  • R‑16 insulation
  • Models: 4 Grooves and 2 Grooves
  • Aluminum
  • Thickness: 1 ¾"
  • 4 colours
  • Polyurethane sandwich door
  • R‑16 insulation
  • Models: 4 Grooves and 2 Grooves

Features and benefits

High-pressure injected polyurethane and aluminum panel drawing

A

High-pressure injected polyurethane

  • Stronger and more energy-efficient insulation
  • Solidly bonded to the aluminum sheets providing a section that is resistant to flexion.

B

Aluminum

  • Pre-painted (5 coats), 0.60 mm thick aluminum is ideal for large-sized doors. Being very lightweight helps to extend the life of the components for doors with a large number of operation cycles.
Interlok triple-contact joints and metal reinforcement plates technical drawing

C

InterlokTM triple-contact joints

  • Sections are strengthened by 2 aluminum walls joined together with mechanical interlocking joints which are more solid than just two bonded walls.
  • Their mechanical thermal breaks are more efficient compared to thermal breaks made with glue.
  • Triple-contact joints provide 2 times more weathertightness than those of the competition. Garaga Lab - Tested Logo

D

Metal reinforcement plates

  • Provide stronger fastening for hinges and struts. These 14‑gauge plates are 2 times thicker than 20‑gauge plates used by other manufacturers.
Wood end blocks and lag screw system technical drawing

E

Wood end blocks

  • Provide a thermal break that is more effective than steel end caps which form a thermal bridge. Garaga Lab - Tested Logo

  • As structural elements of the sections, the kiln-dried pine wood end blocks are installed at the outer ends of the section. They are stronger than insulation covered with a steel cap.

F

Lag screw system

  • Provides much better fastening of the end hinges. The lag screws engage 8 threads into the wood, compared to a self-tapping screw going through a steel end cap engaging only about 2 or 3 threads.
Man Technical Support

Our technical department

We can provide budgetary pricing for your projects and your customers’ ones.

Our technical department

We can provide budgetary pricing for your projects and your customers’ ones.

Panel construction

G-1000 panel construction

1

Aluminum walls

  • Thickness of 0.023” (0.60 mm).
  • Pre-painted aluminum with five coats of protective finish. Baked-on polyester paint. Can be repainted and is corrosion-resistant.
  • Woodgrain finish on both sides of the door.

2

1 ¾" (44.5 mm) insulated door with high-pressure injected polyurethane foam ensuring a high thermal-resistance rating of R-16 (RSI 2.8 or k=0.357 W/m2K) and the solidity of a composite material.

3

InterLokTM joints between each section:

  • Mechanical joints ensure stronger sections with walls of each panel mechanically interlocked (not only bonded by the polyurethane).
  • Mechanical thermal break avoids heat transfer between the interior and exterior walls of each section.
  • Triple-contact joint prevents air infiltration.

4

U-shaped tubular bottom weatherstripping made of thermoplastic elastomer (TPE) ensures the weathertightness of the threshold. Remains flexible and watertight during cold weather, to -62°F (-52°C).

5

Flexible top weatherstripping 2 ½” (64 mm) and aluminum extrusion for aluminum doors of 10’ (3048 mm) wide and over.

6

Wood end blocks made of kiln-dried pine (grade 4). With our lag screw system, ensure better fastening of the end hinges. They also provide a thermal break which prevents thermal bridging.

7

14-gauge steel reinforcement plates placed inside the door for solidly attaching hinges and struts.

Door weight: 1.55 lb/ft2 (7.6 kg/m2)

Models

4 Grooves layout

4 Grooves

2 Grooves layout

2 Grooves

Sizes

Widths

In 1" (25 mm) increments

From 4' to 29'6"

(1.2 m to 9 m)

Heights

In 3" (76 mm) increments

From 6' to 24'

(1.8 m to 7.3 m)

Warranties

  • 10 years against any perforation of aluminum due to rust
  • 10 years on the wood end blocks against cracking and rot
  • 10 years against delamination of the steel skin from the polyurethane foam
  • 1 year on other door components
  • 10 years against seal defects on Standard windows

Colours

White swatch

White

Tundra swatch

Tundra

Universal Brown swatch

Universal Brown

Blue Heron swatch

Heron Blue

The accuracy of colours on the website may vary depending on your screen settings. To see the true colours, please contact your local Garaga dealer for a sample.

Windows

Standard windows

G-5000 Standard windows

Sizes

21" x 13" (533 mm x 330 mm)

Glass

  • Thermopane windows: Clear, Satin, Wired, Tempered, Laminated or Tinted
  • Single glass (3 mm): Clear, Satin, Tempered or Tinted
  • Polycarbonate (3 mm): Single or Thermal (Sealed): Clear or Tinted

Frame colours

White, Brown, Claystone, Desert Sand, Black and Dark Sand.

Oval windows

G-5000 Oval windows

Sizes

26" x 13" (660 mm x 330 mm)

Glass

  • Polycarbonate only

Frame colour

Black

G-4400 Sections (Full Vision)

G-4400 Sections (Full Vision)

All info about this product

See the G-4400 section

Glass

  • Single pane: Clear, Satin, Tempered, Laminated or Tinted
  • Sealed windows: Clear, Satin, Wired, Glue Chip, Low-e, Tempered, Laminated or Tinted
  • Fluted polycarbonate: Clear or Bronze
  • Single polycarbonate : Clear or Tinted
  • Sealed polycarbonate (thermal): Clear

Frame colours

White, Black and Anodized

G‑1000

Hardware

Steel tracks

  • 2” (50 mm), 13-gauge or 14-gauge
  • 3” (76 mm), 12-gauge

Hardware systems and options

Learn more about:

Documents to download

Electric garage door openers

LiftMaster Logo

LiftMaster - 3 Commercial Garage Door Openers

Consult the list of all available commercial opener models

LEED Projects

Leed Projects Logo

Garaga can provide the required information to obtain a LEED project.

Recycled material content of our steel is:

  • 25% post industrial
  • 20% post consumption

Copyright Garaga Inc. | Privacy Policy and Conditions of Use | Sitemap