Garaga Commercial and Industrial Garage Doors Comparative Table

Industrial and commercial doors 1/3
Features G-1000 G-2000 G-3000
Metal and finish Aluminum (wood grain) Steel (smooth) Steel (smooth)
Door thickness 44.5 mm (1 3/4") 44.5 mm (1 3/4") 44.5 mm (1 3/4")
Metal thickness 0.60 mm (0.023 in) 0.60 mm (0.023 in)
  • 0.84 mm (0.033 in) outside
  • 0.60 mm (0.023 in) inside
Coating Baked-on polyester paint Baked-on polyester paint Baked-on polyester paint
Choice of colours 10 colours Tex White Ice White
Available designs Raised panels, 4 grooves Raised panels, 4 grooves Raised panels, 4 grooves
Choice of sizes
  • Height: increments of 25 mm (1"), from 1830 to 7315 mm (6' to 24')
  • Width: increments of 25 mm (1"), from 1525 to 8535 mm (5' to 28')
  • Height: increments of 25 mm (1"), from 1830 to 7315 mm (6' to 24')
  • Width: increments of 25 mm (1"), from 1525 to 7315 mm (5' to 24')
  • Height: increments of 25 mm (1"), from 1830 to 7315 mm (6' to 24')
  • Width: increments of 25 mm (1"), from 1525 to 7315 mm (5' to 24')
Insulation High-pressure injected polyurethane core High-pressure injected polyurethane core High-pressure injected polyurethane core
"R"**Factor R=16 R=16 R=16
"k" Factor k=0.357 W/m2K k=0.357 W/m2K k=0.357 W/m2K
Industrial and commercial doors 2/3
Features G-4000 / (Service-station) G-5000 G-7000
Metal and finish Tubular aluminum Steel (woodgrain) Steel (woodgrain)
Door thickness 44.5 mm (1¾ in) 44.5 mm (1¾ in) 35 mm
Metal thickness 3.2 mm (0.125 in) at hinge fastening point 0.40 mm (0.016 in) 0.40 mm (0.016 in)
Coating Frames made of aluminum extrusions Baked-on polyester paint Baked-on polyester paint
Choice of colours Clear anodized or prepainted White White, Metro brown, Desert sand and Claystone White only
Available designs Glazing (various pane styles) Raised panels, 5 grooves Raised panels, 5 grooves
Choice of sizes
  • Height: increments of 25 mm (1"), from 2135 to 5485 mm (6' to 14')
  • Width: increments of 25 mm (1"), from 2435 to 5485 mm (4' to 18')
  • Height: increments of 75 mm (3"), from 1830 to 7315 mm (6' to 24')
  • Width: increments of 25 mm (1"), from 1525 to 8535 mm (5' to 28')
  • Height: increments of 75 mm (3"), from 1830 to 4900 mm (6' to 16')
  • Width: increments of 25 mm (1"), from 1525 to 4900 mm (5' to 16')
Insulation Non-insulated High-pressure injected polyurethane core High-pressure injected polyurethane core
"R"**Factor None R=16 R=12
"k" Factor None k=0.357 W/m2K k=0.476 W/m2K
Industrial and commercial doors 3/3
Features G-8000 G-8500
Metal and finish Steel (woodgrain) Steel (woodgrain)
Door thickness 50 mm (2")
 50 mm (2")
Metal thickness 24 gauge
 24 gauge
Coating Baked-on polyester paint Baked-on polyester paint 
Choice of colours White only
 White only
Available designs Raised panels Raised panels
Choice of sizes
  • Height: increments of 76 mm (3"), from 2.4 to 5.5 m (8' to 18')
  • Width: increments of 25 mm (1"), from 1.8 to 7.3 m (6' to 24')
  • Height: increments of 76 mm (3"), from 2.4 to 5.5 m (8' to 18')
  • Width: increments of 25 mm (1"), from 1.8 to 7.3 m (6' to 24')
Insulation non insulated
 Polystyrene
"R"**Factor None
 R=6.6
"k" Factor None k=0.860 W/m2K

Conversion Table

  1. 1 mm = 0.0394 inch ; 12 in.=1 ft. ; 1 in.= 25 mm
  2. The "RSI" factor is calculated at the centre of the section.

Back to "Overhead Door Models"

Other pages to read:

Top of page