FEATURES AND BENEFITS


A STEEL WALL WITH ½” DEEP GROOVES


  • Providing more strength and additional bending resistance, our sections are made of two ½“ deep, horizontal grooves with alternating smaller grooves.

  • Very high corrosion-resistance due to its 24-gauge galvanized steel exterior, with a G40 coating (zinc galvanized with a minimum of 120 g/m2).
 

B VERTICAL STILES


  • Structural elements of the sections are attached to the exterior skin by a Tog‑L‑Lock® joining system to ensure a more rigid section.

  • Made of 20-gauge galvanized steel, they provide more secure fastening for hinges and struts.
 

C MOLDED WINDOW FRAMES


  • Clear single-pane glass windows, inserted in a molded PVC frame without a welded joint, will not fade over time.
 


Steel wall
Vertical stiles
Molded window frames


Panel construction - interior view

PANEL CONSTRUCTION



1 Steel wall

  • 24-gauge, G40 hot-dipped galvanized steel with six coats of protective finish
  • Baked-on polyester paint. Can be repainted
  • Woodgrain finish
  • Corrosion-resistant

2 2” (50 mm) door

  • TG-8024: non-insulated
  • TG-8524: CFC-free polystyrene insulation, ensuring a thermal-resistance rating of R-6.6 (RSI 1.2 or k=0.860 W/m2K). The insulation is protected with a PVC backing.

3 Sections are made of ½” (13 mm) deep grooves providing more strength to the door.


4 Tongue & groove joints between sections that fit seamlessly.

5 Continuous PVC bottom weatherstripping made of a U-shape and a semi-circular flexible.

6 20-gauge vertical stiles in galvanized steel attached by a Tog-L-Loc® joining system, with no welding and rivets, at hinge placement locations.

Door weight:
TG-8024: 1.28 lb/ft2 (6.2 kg/m2)
TG-8524: 1.42 lb/ft2 (6.9 kg/m2)


COLOURS


TG-8024, TG-8524 garage door colours


MODEL


TG-8024, TG-8524 garage door - Grooved
          Grooved


SIZES


Widths (In 1” (25 mm) increments) : From 5’ to 24’2” (1,5 m to 7,3 m)

Heights (In 3” (76 mm) increments) : From 8’ to 18’ (2,4 m to 5,5 m)




WINDOWS


WindowsStandard Windows
1⁄8“ (3 mm) single glass,
see details below.
21” x 13” (533 mm x 330 mm)
Colour: White




Standard
Windows
Thermopane WindowsSingle glass (3 mm)Polycarbonate (3 mm)
Clear, Satin, Wired, Tempered, Laminated or TintedClear, Satin, Tempered or TintedSingle or Thermal (Sealed): Clear or Tinted


Full vision
windows
 
Single PaneFluted Polycarbonate  Single Polycarbonate  
Clear, Satin, Tempered, Laminated or TintedClear or BronzeClear or Tinted
Sealed WindowsSealed Polycarbonate (thermal)
Clear, Satin, Wired, Glue Chip, Low-e, Tempered, Laminated or TintedClear

HARDWARE


Steel tracks:

  • 2" (50 mm), 13-gauge or 14-gauge
  • 3" (76 mm), 12-gauge


HARDWARE SYSTEMS



 2" Commercial Light Duty2" Commercial Heavy Duty3" Industrial
 Light Duty Heavy Duty Super Heavy Duty
Tracks
Welded, made of galvanized steel and secured with mounting brackets
2’’ (50 mm), 14-gauge2’’ (50 mm), 13-gauge3’’ (76 mm), 12-gauge
Reinforcement for horizontal tracks
2’’ x 2’’ (50 mm x 50 mm) steel bracket
13-gaugeDoor weight:
- under 650 lb (250 kg) = 13-gauge
- over 650 lb (250 kg) = 8-gauge 1
Door weight:
- under 650 lb (250 kg) = 13-gauge
- over 650 lb (250 kg) = 8-gauge 1
Hinges
Galvanized steel
13-gauge13-gauge13-gauge
Rollers
Industrial type
With ball bearings
Springs
Torsion type
10,000-cycle spring supported by a 1’’ (25 mm) 14-gauge steel tube10,000-cycle spring supported by a 1’’ (25 mm) 2 solid zinc-plated keyway shaft10,000-cycle spring supported by a 1’’ (25 mm) 2 solid zinc-plated keyway shaft
Struts
In galvanized steel, installed
on door sections
- From 12’4’’ (3.8 m) to 16’3” (4.9 m): 2 1⁄4” (57 mm), 22-gauge struts
- From 16’4’’ (5 m) and more: 3’’ (76 mm), 22-gauge struts

Hardware options Hardware
Precision end bearing plate 3For 650 lb (250 kg) doors and over, to provide stronger support for the opening system of the door.
Double hingesRecommended for doors 14’ and wider, for a more stable mounting system.
11-gauge hingesFor very wide and very heavy doors,
1 000 lb (453 kg) and over
12-gauge continuous angleProvides stronger attachment of the tracks on the wall.
1 1⁄4” (30 mm) solid shartProvides more strength to the spring system.
Bridge strutEnsures better resistance to wind load.
Safety bottom bracketsFor a safer door system. If the lifting cables break, these brackets stop the fall of
the door.
Tension bridge reinforcementFor very wide doors (18’ 3” wide and over), prevent warping of the steel door sections, meaning the curving of sections which can be caused by indoor and outdoor temperature differences.
Precision rollersMachined steel: recommended for heavy doors and dusty environments.
Black nylon: made of rigid plastic, they reduce the noise of the door in motion.
Rubber: ensure smooth rolling and are recommended to reduce the noise of the door in motion (ideal for condo or apartment). NB-SS: with a stainless stem, ideal for car washes.
C-shaped or bumper springsFor a softer stop, they are recommended for all manually-operated doors with a high-lift track or a full vertical track.
Pusher springsHighly recommended for large size doors with a standard lift with a Jackshaft opener installed beside the door. They ensure the good tautness of the lifting cables when the door is operating.
Chain hoistFor easier closing and opening of a door operated manually.
"Z" or "L“ style track guardsProtect the tracks in high-traffic areas (ex.: forklifts).
High-cycle springsRecommended for intense uses of more then 50 operation cycles per day. Vary from 25,000 to 200,000 cycles.


DOCUMENTS TO DOWNLOAD

TG-8024 | TG-8524 BrochurePDF Document (887 Kb)




 

Follow us on

FacebookTwitterLinkedInYoutubeGoogle +Pinterest
Select your country